TweetFollow Us on Twitter

TML Pascal Tricks
Volume Number:6
Issue Number:3
Column Tag:Pascal Procedures

TML Pascal Tricks

By Paul Diegenbach, Amsterdam, the Netherlands

XCMD - drawing in a Hypercard stack

The attractiveness of Hypercard is for a large part due to it graphical possibilities. Nice cards always mean nice graphics. The Hypertalk language allows drawing on the screen under program control. When we tear the tools menu off the menubar, we can actually see the actions as the tools flop from pen to brush to marquee and so on. Nice to watch, but oh so slow. Ever tried to draw a complicated graph in Hypercard? I tried it in an attempt to simulate the differentiation of an egg to all the different cells an embryo consists of. One of the theories implies the evaluation of some differential equations and then drawing a thousand points on the screen.

The idea was to let students be able to change the parameters in the equations and see the results in a user-friendly environment. The first step was to implement the equation solving in Hypertalk. Too slow, so an XCMD was quickly written. Drawing the results by Hypertalk: still to slow, so why not do the drawing in the XCMD as well? In a first result the drawing looks nice, but as soon as Hypercard updates the screen from its offscreen bitmap, the drawing disappears. The solution to this problem is to copy the drawing in the paste buffer (scrap) and paste it into Hypercard using the paste command from the menu. This combination works fine and quick. The skeleton for the XCMD is given below, in TML-Pascal, with a Fourier-demo in the drawing part to make it less dumb. In this demo we use parameters from Hypercard for the size of the rectangle and for the Fourier coefficients. Although not necessary, it is often handy to give the rectangle parameters. They can easily be estimated by having a temporary field of the same size and asking in the message window ‘put the size of card field tmp into msg’. The Hypercard stack with this demo implemented is on the source disk for this month.

To avoid flicker between the copy and paste, it is convenient to lock the screen before the XCMD is used. Users of other Pascals sometimes need to remove the ParamPtr parameter, that is the first parameter in every call to the glue routines:

{1}

UNIT PictToScrp;
(******************************************************      
This XCMD demodnstrates a method to plot and calculate in Pascal (perhaps 
with floating point processor enabled) and then copy and paste the picture 
in the card compile and link as follows (assuming Fourier is an existing 
stack):
  
  TMLPascal Fourier.p
or:  ( really fast on a mac II)
  TMLPascal Fourier.p  -MC68020 -MC68881 -d Elems881=true

  Link -w -t ‘STAK’ -c ‘WILD’ 
  -m FOURIER -rt XCMD=1282 -sg Fourier 
   Fourier.p.o 
   “{Libraries}”Runtime.o 
   “{Libraries}”Interface.o 
   “{TMLPLibraries}”TMLPasLib.o 
   “{Libraries}”HyperXLib.o 
   -o “Fourier”

 Hypercard call :
  set the lockscreen to true
  -- prevents flicker
  Fourier  330,14,480,319,10,7,5,3,4
  -- 330,14,480 is the area to draw into
  -- 10,7,5,3,4  are the fourier factors times 10
  set the lockscreen to false
 ******************************************************)

INTERFACE

  USES MemTypes, QuickDraw, OSIntf, ToolIntf, PackIntf, PasLibIntf, HyperXCMD;

  PROCEDURE Fourier(ParamPtr: XCMDPtr);

IMPLEMENTATION

  PROCEDURE PictScrap(ParamPtr: XCMDPtr); FORWARD;

  PROCEDURE Fourier(ParamPtr: XCMDPtr);
    BEGIN
      PictScrap(ParamPtr);
    END;

  PROCEDURE PictScrap(ParamPtr: XCMDPtr);
    VAR
      thePoint     : Point;
      hPicture     : PicHandle;
      rg           : rect;
      Piclength    : LONGINT;
      xoffset, yoffset: integer;
      str          : str255;
      xLeft, bot, top, xRight: LONGINT;
      one, two, three, four, five: LONGINT;
      x, y         : extended;
      z1, z2, z3, z4, z5: extended;

PROCEDURE MyDrawing;
 { all your drawing stuff goes here }
      VAR
        i            : integer;
        maxim, offset: extended;

      FUNCTION Sinus(x: extended): extended;
        BEGIN
          Sinus := sin(x) * z1 + sin(2 * x) * z2 + sin(3 * x) * z3 + 
sin(4 * x)  * z4 + sin(5 * x) * z5
 { the more, the better }
        END;

      BEGIN
        eraserect(rg);
        Framerect(rg); { optional }
        offset := top + (bot - top) / 2.0;
        z1 := one / 10.0;
        z2 := two / 10.0;
        z3 := three / 10.0;
        z4 := four / 10.0;
        z5 := five / 10.0;
        x := 0.02 {1 / 50} ;
        maxim := Sinus(x);
        FOR i := 2 TO 314 DO
          BEGIN
          IF i MOD 10 = 0 THEN
SendCardMessage(ParamPtr, ‘set cursor to busy’);
          x := i / 50;
          y := Sinus(x);
          IF maxim < y THEN
            maxim := y;
          END;

        x := 1 / 50;
        y := Sinus(x);
        maxim := 100 / maxim;
SendCardMessage(ParamPtr, ‘set cursor to busy’);
        moveto(xLeft + 1, round(y * maxim + offset));
        FOR i := 2 TO 314 DO
          BEGIN { for two pi }
          x := i / 50;
          y := Sinus(x);
lineto(i + xLeft + 1, round(y * maxim + offset))
          END;
SendCardMessage(ParamPtr, ‘set cursor to busy’);
        penpat(ltgray);
        moveto(xLeft + 1, round(offset));
        lineto(xRight - 2, round(offset));
        pennormal
      END;

    FUNCTION GetParameter(n: integer): LONGINT;
      VAR
        tmp          : LONGINT;
      BEGIN
        ZeroToPas(ParamPtr, ParamPtr^.params[n]^, str);
        stringToNum(str, tmp);
        GetParameter := tmp
      END;

    BEGIN
      IF ParamPtr^.paramCount <> 9 THEN
        SendCardMessage(ParamPtr, ‘put “wrong number of parameters” into 
msg’)
{ I think a more convenient way of error report than by ParamPtr^.ReturnValue 
}
      ELSE
        BEGIN
{get the drawing rectangle coordinates from hypercard }
        xLeft := GetParameter(1);
        top := GetParameter(2);
        xRight := GetParameter(3);
        bot := GetParameter(4);

{ In this example : get Fourier coëfficients from hypercard }
        one := GetParameter(5);
        two := GetParameter(6);
        three := GetParameter(7);
        four := GetParameter(8);
        five := GetParameter(9);
        setrect(rg, xLeft, top, xRight, bot);
        xoffset := xLeft + 5;
        yoffset := top + 5;
        cliprect(rg);
        hPicture := OpenPicture(rg);
        Showpen;
        MyDrawing; { here all your drawing }
        closepicture;
        Piclength := GethandleSize(handle(hPicture));
        IF ZeroScrap + putscrap(Piclength, ‘PICT’, ptr(hPicture^)) = 
NoErr THEN
     ParamPtr^.ReturnValue := PasToZero(ParamPtr, ‘’)
        ELSE
          ParamPtr^.ReturnValue := PasToZero(ParamPtr, ‘something wrong’);
SendCardMessage(ParamPtr, ‘choose select tool’);
SendCardMessage(ParamPtr, ‘domenu “Paste Picture”’);
SendCardMessage(ParamPtr, ‘choose browse tool’);
        END
    END;
END.

Small and Dirty “Write Always”

In the debugging of large programs we were accustomed to put a lot of ‘writeln’s’ in the source text to show what was happening. Although a workable solution on mainframes and mini’s, that’s not so easy in the Macintosh environment, there is not always a window available to write in. The following small subroutine (TML Pascal version) does the trick with some disadvantage: it overwrite all its lines on top of each other at the bottom of the screen in some kind of status line (bit like Online companion), but, sorry, the line is not automatically removed after leaving the program. Dirty isn’t it, so surely for debugging only. An ‘invalrect’ after each multifinder event and at the end of the program is sometimes a solution.

In the program source you write something like :

--2

 if dbg then DQText(‘now in procedure blahblah’)

(The clever one’s can write a MPW-script to put it after the first begin in every procedure or function) Dbg is used as a constant (or in a compiler directive).

The procedure (as a Pascal unit) looks like :

{3}

UNIT DQTextProcedure;
  INTERFACE
    USES
MemTypes, QuickDraw, OSIntf, ToolIntf, PackIntf, QDaccess;
 
{ Tml pascals QDaccess defines:
 TYPE  QDGlobalsPtr = ^QDGlobalsRec;
    QDGlobalsRec =
      record
        randSeed   :  LongInt;
        screenBits :  BitMap;
        arrow      :  Cursor;
        dkGray     :  Pattern;
        ltGray     :  Pattern;
        gray       :  Pattern;
        black      :  Pattern;
        white      :  Pattern;
        ThePort    :  GrafPtr;
      end;
function QDGlobals: QDGlobalsPtr;external;}

PROCEDURE DQText(Message: Str255);
  IMPLEMENTATION
PROCEDURE DQText(Message: Str255);
VAR
  SavedPort    : GrafPtr;
  LocalPort    : GrafPort;
  TheRect      : Rect;
BEGIN
  WITH QDGlobals^ DO
    BEGIN
      GetPort(SavedPort);
      OpenPort(@LocalPort);
      SetPort(@LocalPort);
      WITH ScreenBits.Bounds DO
 { this is QDGlobals^ s ScreenBits ! }
SetRect(TheRect, Left, Bottom-20, Right, Bottom);
      FillRect(TheRect, White);
      MoveTo(TheRect.Left, TheRect.Top);
      LineTo(TheRect.Right, TheRect.Top);
      MoveTo(TheRect.Left+7, TheRect.Bottom-7);
      DrawString(Message);
      ClosePort(@LocalPort);
      SetPort(SavedPort);
   END;
END;
END.

PROGRAM tstDQtext;
  { test the dqtext procedure : }
  USES MemTypes, QuickDraw, OSIntf, ToolIntf, PackIntf,
    PaslibIntf, QDaccess, DQtext;
  (*
  link as :
    Link  -t ‘APPL’ -c ‘????’ 
      DQtext.p.o 
      tstDQtext.p.o 
      “{Libraries}”Runtime.o 
      “{Libraries}”Interface.o 
      “{TMLPLibraries}”TMLPasLib.o 
      -o tstDQtext
  *)
  BEGIN
    textbook(NIL); { TML pascal simple window }
    writeln(‘ see bottom line’);
    writeln(‘ click mouse button’);
    PLFlush(output);
    DQtext(‘before’);
    REPEAT
    UNTIL button;
    DQtext(‘after mouse button’);
    writeln(‘ type return to end program’);
    readln
  END.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

The Legend of Heroes: Trails of Cold Ste...
I adore game series that have connecting lore and stories, which of course means the Legend of Heroes is very dear to me, Trails lore has been building for two decades. Excitedly, the next stage is upon us as Userjoy has announced the upcoming... | Read more »
Go from lowly lizard to wicked Wyvern in...
Do you like questing, and do you like dragons? If not then boy is this not the announcement for you, as Loongcheer Game has unveiled Quest Dragon: Idle Mobile Game. Yes, it is amazing Square Enix hasn’t sued them for copyright infringement, but... | Read more »
Aether Gazer unveils Chapter 16 of its m...
After a bit of maintenance, Aether Gazer has released Chapter 16 of its main storyline, titled Night Parade of the Beasts. This big update brings a new character, a special outfit, some special limited-time events, and, of course, an engaging... | Read more »
Challenge those pesky wyverns to a dance...
After recently having you do battle against your foes by wildly flailing Hello Kitty and friends at them, GungHo Online has whipped out another surprising collaboration for Puzzle & Dragons. It is now time to beat your opponents by cha-cha... | Read more »
Pack a magnifying glass and practice you...
Somehow it has already been a year since Torchlight: Infinite launched, and XD Games is celebrating by blending in what sounds like a truly fantastic new update. Fans of Cthulhu rejoice, as Whispering Mist brings some horror elements, and tests... | Read more »
Summon your guild and prepare for war in...
Netmarble is making some pretty big moves with their latest update for Seven Knights Idle Adventure, with a bunch of interesting additions. Two new heroes enter the battle, there are events and bosses abound, and perhaps most interesting, a huge... | Read more »
Make the passage of time your plaything...
While some of us are still waiting for a chance to get our hands on Ash Prime - yes, don’t remind me I could currently buy him this month I’m barely hanging on - Digital Extremes has announced its next anticipated Prime Form for Warframe. Starting... | Read more »
If you can find it and fit through the d...
The holy trinity of amazing company names have come together, to release their equally amazing and adorable mobile game, Hamster Inn. Published by HyperBeard Games, and co-developed by Mum Not Proud and Little Sasquatch Studios, it's time to... | Read more »
Amikin Survival opens for pre-orders on...
Join me on the wonderful trip down the inspiration rabbit hole; much as Palworld seemingly “borrowed” many aspects from the hit Pokemon franchise, it is time for the heavily armed animal survival to also spawn some illegitimate children as Helio... | Read more »
PUBG Mobile teams up with global phenome...
Since launching in 2019, SpyxFamily has exploded to damn near catastrophic popularity, so it was only a matter of time before a mobile game snapped up a collaboration. Enter PUBG Mobile. Until May 12th, players will be able to collect a host of... | Read more »

Price Scanner via MacPrices.net

Sunday Sale: Apple Studio Display with Standa...
Amazon has the standard-glass Apple Studio Display on sale for $300 off MSRP for a limited time. Shipping is free: – Studio Display (Standard glass): $1299.97 $300 off MSRP For the latest prices and... Read more
Apple is offering significant discounts on 16...
Apple has a full line of 16″ M3 Pro and M3 Max MacBook Pros available, Certified Refurbished, starting at $2119 and ranging up to $600 off MSRP. Each model features a new outer case, shipping is free... Read more
Apple HomePods on sale for $30-$50 off MSRP t...
Best Buy is offering a $30-$50 discount on Apple HomePods this weekend on their online store. The HomePod mini is on sale for $69.99, $30 off MSRP, while Best Buy has the full-size HomePod on sale... Read more
Limited-time sale: 13-inch M3 MacBook Airs fo...
Amazon has the base 13″ M3 MacBook Air (8GB/256GB) in stock and on sale for a limited time for $989 shipped. That’s $110 off MSRP, and it’s the lowest price we’ve seen so far for an M3-powered... Read more
13-inch M2 MacBook Airs in stock today at App...
Apple has 13″ M2 MacBook Airs available for only $849 today in their Certified Refurbished store. These are the cheapest M2-powered MacBooks for sale at Apple. Apple’s one-year warranty is included,... Read more
New today at Apple: Series 9 Watches availabl...
Apple is now offering Certified Refurbished Apple Watch Series 9 models on their online store for up to $80 off MSRP, starting at $339. Each Watch includes Apple’s standard one-year warranty, a new... Read more
The latest Apple iPhone deals from wireless c...
We’ve updated our iPhone Price Tracker with the latest carrier deals on Apple’s iPhone 15 family of smartphones as well as previous models including the iPhone 14, 13, 12, 11, and SE. Use our price... Read more
Boost Mobile will sell you an iPhone 11 for $...
Boost Mobile, an MVNO using AT&T and T-Mobile’s networks, is offering an iPhone 11 for $149.99 when purchased with their $40 Unlimited service plan (12GB of premium data). No trade-in is required... Read more
Free iPhone 15 plus Unlimited service for $60...
Boost Infinite, part of MVNO Boost Mobile using AT&T and T-Mobile’s networks, is offering a free 128GB iPhone 15 for $60 per month including their Unlimited service plan (30GB of premium data).... Read more
$300 off any new iPhone with service at Red P...
Red Pocket Mobile has new Apple iPhones on sale for $300 off MSRP when you switch and open up a new line of service. Red Pocket Mobile is a nationwide MVNO using all the major wireless carrier... Read more

Jobs Board

Licensed Practical Nurse - Womens Imaging *A...
Licensed Practical Nurse - Womens Imaging Apple Hill - PRN Location: York Hospital, York, PA Schedule: PRN/Per Diem Sign-On Bonus Eligible Remote/Hybrid Regular Read more
DMR Technician - *Apple* /iOS Systems - Haml...
…relevant point-of-need technology self-help aids are available as appropriate. ** Apple Systems Administration** **:** Develops solutions for supporting, deploying, Read more
Operating Room Assistant - *Apple* Hill Sur...
Operating Room Assistant - Apple Hill Surgical Center - Day Location: WellSpan Health, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Read more
Solutions Engineer - *Apple* - SHI (United...
**Job Summary** An Apple Solution Engineer's primary role is tosupport SHI customers in their efforts to select, deploy, and manage Apple operating systems and Read more
DMR Technician - *Apple* /iOS Systems - Haml...
…relevant point-of-need technology self-help aids are available as appropriate. ** Apple Systems Administration** **:** Develops solutions for supporting, deploying, Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.